Below are the last 80 forum topics posted on the GlobalSurfers message board.

Posting a new Topic:

You can post a new question from the country page to which the question is relevant to, or at the bottom right hand of this page.

You don't need to register
to post a new question or answer excisting ones


.

Want to promote your stuff?

Have a surf camp? Surf accommodation or boat charters to promote?
List your place for free on SurferDream to get maximum exposure.

Author

Topic: board shaping

Views: 1771

replies: 8

By:

sickboy

Posted in

Canada Canada

 

board shaping

« on: March 21 2006 10:03:00 »

hey everyone, i know there are a few people round the montreal area that shape. And I been thinking bout making myself a fish, prolly gonna go the eps and epoxy route. finding supplies seems to be an issue, and as I have never shaped before i think it's gonna be tough. been checkin out swaylocks, but was hoping to get some local help, like where is the best place for supplies, specifically blanks. Also any shaping tips or suggestions, ways to avoid mistakes would be greatly appreciated.
cheers,
B

By:

NS slider

RE: board shaping

« Reply #1 on: March 21 2006 14:03:00 »

are you making a reeal fish or a short board with swallow tail?  dude i dont htink fish's are your best choice  for river waves. maybe a swallow tail would work good or a round squash. what shape a wave do your spots produce?

By:

sickboy

RE: board shaping

« Reply #2 on: March 22 2006 08:03:00 »

I am making a fish but it is not for river used. I already have a 6'3 squash for the river. I am thinking fish for east coast surf. I will be in NS most of the summer and usually hit the US yearly so  I want something for those smaller summer days that isnt my 7'2 funboard.

By:

NS SLIDER

RE: board shaping

« Reply #3 on: March 22 2006 14:03:00 »

If your coming to NS then your fish will be your main board for the summer!  Also bring a longboard.  I am making a fish as we speak 6'8" x 16" x 22" x 18"- 3.25" 8" deep swallow twinzer.  Single to double concave with a slight vee.  epoxy over EPS 2x10 OZ cloth on top 2x6OZ cloth bottom.  FCS fins.  There are some good shapers here in NS including me!



By:

sickboy

RE: board shaping

« Reply #4 on: March 22 2006 15:03:00 »

i know there are several great shapers on our east coast. I know of one in particular brent simone. friend of a friend type deal. I already own 2 boards, but want to get into shaping moreso than just having a new board. I was hoping to find someone in the area that could give me advice, where to fin materials, and maybe give me a hand or let me watch them shape. I knw there are a few shapers in the montreal area, was hoping to get the board done by summer but i doubt it will happen now. maybe it will becoime a late summer project.

By:

Sylvain Boucher

RE: board shaping

« Reply #5 on: January 27 2007 20:01:00 »

If you need some material I got it all in montreal blanks form 60 bucks on. frenchy surfboards  look at my site.

By:

foam juckie

RE: board shaping

« Reply #6 on: February 12 2007 00:02:00 »

or you could build you own for like 15 bucks, just check out swaylocks, 15 dollar board.

By:

Dani

RE: board shaping

« Reply #7 on: March 23 2007 06:03:00 »

Who are the best board shapers on the west and east coasts. Want to get a new board and would like to support a Canadian shaper.


Or view more Canada surf / travel topics here

Looking for surf spots in Canada ?

surf atlas